Click To Email (623) 323-9044 Opening hours: Mon - Friday, 6:00am to 7:00pm
Get a Free Quote

Professional Pool Equipment Checks & Performance Inspections

Catch Small Problems Before They Become Expensive Repairs

At McCool's Pools, comprehensive equipment inspections are a cornerstone of every weekly service visit. Our experienced technicians don't just maintain your pool—they actively monitor the health and performance of every component in your system. With nearly two decades of experience servicing pools throughout the Phoenix area, we've learned that consistent equipment checks are the most effective way to prevent costly breakdowns, extend equipment life, and ensure your pool operates efficiently year-round.

Our Comprehensive Equipment Inspection Protocol

Pump Performance Assessment

We monitor your pump's operation during every visit, listening for unusual sounds that indicate bearing wear or motor problems. We check for proper priming, inspect shaft seals for leaks, and verify adequate water flow. Our technicians note any vibration or overheating issues and monitor amp draw to catch electrical problems before they lead to motor failure. Early detection of pump issues saves you hundreds or even thousands in repair costs.

Filter System Evaluation

Filter pressure readings tell us everything about your filtration system's health. We monitor and record pressure levels, identifying trends that indicate when your filter needs cleaning or when internal damage may be developing. We inspect filter tanks for leaks, check multiport valves for proper operation, and verify that your filter is maintaining optimal water quality. Whether you have a cartridge, DE, or sand filter, we know what to look for.

Heater Operation Check

During heating season, we verify your heater ignites properly, reaches target temperature, and shuts down correctly. We inspect for signs of corrosion, check for proper venting, and monitor for unusual noises or cycling issues. Gas leaks, ignition problems, and heat exchanger issues are caught early through our systematic inspection process, preventing dangerous situations and expensive emergency repairs.

Automation System Monitoring

Modern pool systems rely on sophisticated automation equipment that requires regular attention. We verify that timers are set correctly for the season, check that all automated features function as programmed, and ensure proper communication between system components. We identify programming issues, failed sensors, and communication errors that could compromise your pool's operation or waste energy.

Salt System Inspection

For salt chlorine generators, we monitor cell condition, check salt levels, verify proper chlorine output, and inspect for calcium buildup that reduces efficiency. We ensure your system's flow switch operates correctly and that all electrical connections remain secure. Regular salt system inspections prevent the common problems that lead to inadequate sanitation or expensive cell replacement.

Get A Free Quote graphic

Why Regular Equipment Checks Matter

Prevent Costly Emergency Repairs

Most major equipment failures don't happen suddenly—they develop over time with warning signs that trained technicians can detect. A pump bearing that's beginning to fail makes distinctive sounds. A heater that's developing heat exchanger problems shows specific symptoms. By catching these issues early, we help you avoid the much higher costs of emergency service calls and catastrophic equipment failure.

Extend Equipment Lifespan

Pool equipment that operates within proper parameters lasts significantly longer than equipment that runs stressed or compromised. Our regular checks ensure pumps maintain proper flow, filters operate at correct pressure, and heaters cycle correctly. This attention to optimal operating conditions can add years to your equipment's service life, protecting your investment and delaying expensive replacement costs.

Maintain Energy Efficiency

Equipment that isn't operating correctly wastes electricity and gas. A pump working against a clogged filter consumes excess power. A dirty salt cell requires more runtime to produce adequate chlorine. A heater with scaling uses more gas to achieve target temperature. Our equipment checks identify and address these efficiency problems, keeping your operating costs as low as possible.

Ensure Safe Operation

Some equipment problems present safety hazards. Gas leaks near heaters, electrical issues with pumps and automation systems, and suction problems with drain covers all require immediate attention. Our systematic inspection process identifies these safety concerns before they can endanger your family or guests.

What We Check During Every Visit

Our comprehensive equipment inspection protocol includes:

  1. Visual inspection of all pool equipment for leaks, corrosion, or damage
  2. Pump operation verification and sound assessment
  3. Filter pressure reading and trend monitoring
  4. Equipment pad cleanliness and proper ventilation
  5. Electrical connection security and condition
  6. Plumbing valve operation and leak inspection
  7. Timer and automation system functionality
  8. Salt system output and cell condition (when applicable)
  9. Heater ignition and operation (during heating season)
  10. Automatic pool cleaner performance
  11. In-floor cleaning system function (when applicable)
  12. Safety equipment operation and condition

Common Problems We Detect Early

Pump Issues

Failing bearings, worn seals, loose mounting bolts, electrical problems, inadequate priming, and impeller damage are all caught during routine inspections before they lead to complete pump failure.

Filter Problems

Rising pressure indicating cleaning needs, falling pressure suggesting internal damage, leaking tanks or valves, broken grids or cartridges, and multiport valve failures are identified and addressed promptly.

Heater Concerns

Ignition problems, flame sensor issues, heat exchanger deterioration, venting problems, pressure switch failures, and gas valve issues are detected through regular operational checks.

Automation Failures

Programming errors, failed relays, sensor problems, communication issues between devices, and incorrect timer settings are identified and corrected to maintain proper system operation.

Salt System Degradation

Calcium buildup on cells, inadequate chlorine production, flow switch failures, power supply issues, and incorrect settings are caught and resolved before sanitation suffers.

The McCool's Equipment Inspection Advantage

Experienced Technicians

Our service technicians aren't just pool cleaners—they're trained equipment specialists who understand how pool systems operate. With nearly two decades of field experience, we know what normal looks like and can quickly identify when something isn't right. This expertise means problems are caught earlier and diagnosed more accurately.

Detailed Service Records

We maintain comprehensive records of equipment performance over time. This historical data helps us identify developing trends—like gradually rising filter pressure or slowly decreasing pump flow—that signal impending problems. Our documentation also provides valuable information if equipment needs repair or replacement.

Proactive Communication

When we identify equipment issues during our inspections, we communicate clearly and promptly. We explain what we've found, why it matters, and what options you have for addressing it. This transparency helps you make informed decisions about maintenance and repairs without pressure or confusion.

Same Technician Continuity

Having the same technician service your pool week after week means they become intimately familiar with your specific system. They know how your equipment normally operates and can quickly spot any changes or developing problems. This consistency is invaluable for catching issues early.

Professional Equipment Monitoring You Can Count On

Don't wait for equipment failure to discover there was a problem. McCool's Pools provides thorough, professional equipment inspections with every service visit, giving you advance warning of developing issues and helping you avoid costly emergency repairs. Our systematic approach to equipment monitoring has protected thousands of pool systems throughout the Phoenix area for nearly two decades. Contact us today to experience the peace of mind that comes from knowing your pool equipment is in expert hands.

Get Started Today graphic